Leaky toilets
Share
A leaking toilet can be a frustrating and costly problem. Not only can it waste water and increase your water bill, but it can also cause damage to your bathroom floor and subfloor. Fortunately, repairing a leaking toilet is a relatively simple task that can be done with a few basic tools and some know-how. In this article, we’ll walk you through the steps to repair a leaking toilet. Step 1: Turn off the water supply The first step in repairing a leaking toilet is to turn off the water supply. Locate the shut-off valve behind the toilet and turn it clockwise until it is fully closed. This will prevent water from flowing into the tank and bowl while you work on the toilet. Step 2: Drain the tank and bowl Next, you’ll need to drain the tank and bowl to remove any remaining water. To do this, flush the toilet and hold down the handle until all the water has drained from the tank and bowl. You can also use a sponge or towel to soak up any remaining water. Step 3: Identify the source of the leak Once the toilet is drained, you’ll need to identify the source of the leak. Common sources of leaks include the tank bolts, the flush valve, the fill valve, and the wax ring. Look for water around the base of the toilet, around the tank bolts, or inside the tank itself to determine where the leak is coming from. Step 4: Replace the faulty part Once you’ve identified the source of the leak, you’ll need to replace the faulty part. If the leak is coming from the tank bolts, you may need to tighten them or replace the washers. If the leak is coming from the flush valve or fill valve, you’ll need to replace the entire valve. If the leak is coming from the wax ring, you’ll need to remove the toilet and replace the wax ring. Step 5: Reassemble the toilet After you’ve replaced the faulty part, it’s time to reassemble the toilet. Follow the manufacturer’s instructions to install the new part and reattach the tank and bowl. Be sure to tighten all bolts and connections securely. Step 6: Turn on the water supply Once the toilet is reassembled, turn on the water supply and check for leaks. If you notice any leaks, tighten the connections or replace the faulty part. In conclusion, repairing a leaking toilet is a simple task that can be done with a few basic tools and some know-how. By following these steps, you can save money on your water bill and prevent damage to your bathroom floor and subfloor. If you’re not comfortable with DIY repairs, or if the leak is more serious than you can handle, it’s best to call a professional plumber to fix the problem